☀️ 2026 solar incentives announced — the right time to invest!Calculate your savings →
Home / Solar Water Heater
🔆 New Product

Free Hot Water from the Sun

The comfort of an electric boiler, the economy of solar. The photovoltaic panel heats water directly with the sun; on cloudy days the system switches to grid backup automatically — hot water 365 days a year.

Contact us for current pricing see models →

💧 60–200 L capacity ↔️ Horizontal & vertical models 🛡️ Enamel inner tank 🏅 TÜV • CE • UL • UN38.3
🔆 New-Generation Product

Free hot water from the sun

Monocrystalline solar panels heat the water with solar energy; the smart GF-20 controller manages temperature. On sunless days the system automatically switches to grid (AC) heating — the comfort of a boiler, the economy of the sun.

  • Free heating with solar energy
  • Automatic grid (AC) backup on cloudy days
  • Enamel inner tank — durability and hygiene
  • Freeze, overheat and dry-run protection
Get a Quote
Product Gallery

Inspect the tank from every angle

Horizontal body with enamel inner tank, touch control panel and standard 1/2" water connections. Tap a thumbnail to change the angle, click the image to enlarge.

Touch control panel close-up

Touch control panel

Temperature setting, heating mode and time schedule from a single panel. Error codes appear on the display.

Hot water outlet, cold water inlet and drain port

Standard water connections

Hot water outlet, cold water inlet and drain port are labelled; the relief valve hose comes fitted.

Heating element and anode service cover

Service cover

The heating element and magnesium anode come out through this cover — no need to take the tank down for servicing.

How Does It Work?

Free hot water in 3 steps

The photovoltaic panel feeds electricity directly to the water heater — simple, safe and efficient.

  1. 1

    Photovoltaic Module

    The monocrystalline panel turns sunlight into electricity.

  2. 2

    Water Heater Tank

    The enamel inner tank keeps heat in with polyurethane insulation.

  3. 3

    Hot Water Use

    Bathroom, kitchen — uninterrupted hot water for the whole home.

☁️ What happens on cloudy / rainy days?

The system automatically switches to grid power — hot water all year round. The smart heating strategy uses free solar on sunny days and cheap off-peak electricity at night.

8 Major Advantages

Why this system?

🏠

Central Hot Water

One system for the whole home.

💸

Free Hot Water

Zero cost with sunlight.

🧠

Smart Heating

Tariff-aware automatic strategy.

📅

Hot Water Every Day

Uninterrupted use 365 days.

🔒

Safe

No electricity-water contact; PV heating.

💚

Healthy

Enamel tank + magnesium anode.

🛋️

Comfortable

Stable temperature, unaffected by seasons.

🌿

Low Carbon

Eco-friendly clean energy.

⚙️ Smart Control

GF-20 Photovoltaic Controller

A smart panel managing water temperature, time and heating mode. ±1°C measurement and control accuracy for comfort and safety.

  • PV + AC hybrid heating management
  • Programmable smart mode
  • Instant (rapid) heating
  • 0–90°C measurement · 35–75°C setting
  • Freeze & dry-run protection
  • Overheat protection (E5)
Model Options

Choose your model

Models with enamel inner tanks from 60 L to 200 L for your family's hot water needs. Contact us for current pricing and stock; the binding quote follows a free site survey.

↔️

Horizontal Water Heater

60L • 80L • 100L

Ideal for compact spaces and balcony installations.

↕️

Vertical Water Heater

120L • 150L • 200L

For large families and high consumption.

How many litres do I need?

  • 1–2 people60–80 LSingle person, couple or holiday-home use
  • 3–4 people100–120 L2–3 showers a day plus kitchen use
  • 5+ people150–200 LLarge family, back-to-back showers

If you have a bathtub, more than one bathroom or a guesthouse/apart use, pick the next capacity up. If unsure, let's decide together during the free survey.

CapacityTypePV power (DC)Dimension (mm)AC power (kW)Inner tankPrice
60 LYatay550 W430 × 7451,5 – 2 kWEnamelRequest a quote
80 LYatay600 W430 × 8931,5 – 2 kWEnamelRequest a quote
100 LYatay700 W470 × 11402 – 2,5 kWEnamelRequest a quote
120 LDikey900 W470 × 12512 – 2,5 kWEnamelRequest a quote
150 LDikey1200 W480 × 13802,5 kWEnamelRequest a quote
200 LDikeyEnamelRequest a quote

Voltage: 110–240 V · Control: button / touch / mechanical · Water flow is unaffected by seasons.

✔ TÜV✔ CE✔ UL✔ UN38.3IEC 61000IEC 62477IEC 62619IEC 63056
Get a quote for this product
What's in the system?

Turnkey, complete set

The tank alone is not a system. Every component needed to hand it over fully working is included in the quote.

🛢️

Body with enamel inner tank

Water heater with polyurethane insulation, magnesium anode and heating element — in the capacity you choose.

🔆

Monocrystalline PV panel

The photovoltaic module feeding the tank directly; from 550 W to 1200 W depending on capacity.

🎛️

GF-20 control unit

Smart control panel managing PV and grid heating, together with the temperature sensor.

🔩

Mounting structure and hardware

Panel feet, tank bracket/foot fittings, bolts and anchors.

🔌

DC cable and MC4

Solar cable and connectors between the panel and the control unit.

🚿

Plumbing connection

Pressure relief valve, flexible connectors and the labour to tie into your existing plumbing.

📦 Delivery and installation

In Antalya, Manavgat, Side, Serik and Alanya installation is done by our team. To other provinces the product is shipped by courier; installation can be done by your local fitter, with a manual and phone support provided.

Installation

From survey to hot water in 4 steps

A typical residential installation is completed within the same day.

Wiring diagram: the solar panel on the roof connects to the terminal of the water heater in the bathroom with a two-core DC cable; the terminal carries PV plus, PV minus, AC live and neutral, and the tank has a hot water outlet and a cold water inlet.
The panel sits on the roof or balcony and the tank indoors; only a two-core DC cable runs between them — water never goes up to the panel, so there is no freezing or scaling risk. Click the image to enlarge.
  1. 1

    Free site survey

    Capacity is set according to roof/terrace orientation, existing plumbing and household needs.

  2. 2

    Tank and panel mounting

    The tank is fixed to a load-bearing surface and the panel is set at the right angle facing a shade-free direction.

  3. 3

    Water and DC connection

    Cold water inlet, hot water outlet and relief valve are connected; the panel cable is run to the control unit.

  4. 4

    Commissioning

    The tank is filled, leak and heating tests are run, and operation is explained.

🛡️ Tank Technology

The secret of healthy hot water

A corrosion- and scale-resistant inner tank; long life with an extended, thickened magnesium anode.

  1. Baosteel special enamel steel plate
  2. High-strength adhesive layer
  3. Blue Gold Steel enamel underglaze
  4. Enamel reinforcement layer
  • Anti-fouling, no scaling
  • Antibacterial inner surface
  • High-density polyurethane insulation
  • Long life with magnesium anode
🏅 Quality & Certificates

Manufactured to international standards

TÜV, CE, UL and UN38.3 certified; produced on robotic lines to IEC compliance standards. High-efficiency monocrystalline PV panel technology.

  • Robotic production lines
  • Personalized project design
  • High-efficiency monocrystalline panel
  • Certified quality processes
Why GESPA?

With you before and after the purchase

📍

Free on-site survey

The best capacity and mounting plan for your home.

🔧

Professional installation

Experienced team, safe and fast installation.

🤝

After-sales support

Local service assurance in the Antalya region.

🔗

End-to-end solution

Panel + water heater + storage from one hand.

Gallery

Shots from the field

Real use at home, in the bathroom and on the roof; images from the production line.

Maintenance & Warranty

What do you need to do after installation?

With no moving parts, a photovoltaic water heater is a low-maintenance system.

🧪

Magnesium anode

Checked every 2–4 years depending on water hardness and replaced if needed; it protects the tank from corrosion.

🧼

Panel cleaning

Washing off the dust once or twice a year is enough. A dirty panel lowers efficiency.

🛟

Pressure relief valve

Once a year it is drained by hand to check it works — important for pressure safety.

🤝

Warranty and service

The product warranty follows the manufacturer's terms; in the Antalya region we provide the service ourselves.

Frequently Asked Questions

About the water heater

Yes. On cloudy/rainy days or at night, the system automatically switches to grid (AC) heating based on water temperature, ensuring hot water year-round.

Models from 60–200 L are available by household size. 60–80 L for 1–2 people, 100–120 L for 3–4, 150–200 L for 5+.

Horizontal models (60/80/100 L) suit compact spaces and balconies; vertical models (120/150/200 L) are ideal for large families and high consumption.

On sunny days heating is largely free, saving significantly versus a traditional electric boiler. The exact figure depends on usage and region.

Roof/terrace integrated installation is done by our team. Enamel inner tank and A-brand equipment ensure long life; details are confirmed during a free survey.

In evacuated-tube systems the water circulates inside the tubes, bringing risks of scaling, freezing and tube breakage. In a photovoltaic system the panel only generates electricity and water never enters it — the plumbing is simple, there is no freezing risk in winter, and the panel can go on the roof while the tank stays indoors.

Yes. The water is inside the insulated tank, not in the panel, and the control unit has freeze protection. On days when the sun isn't enough, grid support kicks in.

Usually yes. Connection dimensions are standard and the existing hot/cold water lines can be used. The mounting surface must carry the filled weight and a shade-free spot is needed for the panel — we check both during the survey.

There are no moving parts. Dusting the panel once or twice a year, checking the relief valve annually and inspecting the magnesium anode every 2–4 years depending on water hardness is enough.

Let's choose the right model for your home together

Contact us for a free survey and a transparent quote.

Get a Quote
💬